1. Start
  2. Home services
  3. Guide

Bathroom remodel cost: what drives the price and how to control it

Modern bathroom with shower and vanity
Photo by Lotus Design N Print on Unsplash

There is no single price for a bathroom remodel. A cosmetic refresh and a full gut of the same room are different projects. Knowing what drives the cost helps you get quotes you can compare.

The big cost drivers

  • Moving plumbing. Keeping the toilet, shower and sink where they are is the largest single saving. Relocating a drain means opening floors.
  • Tile and waterproofing. A tiled shower takes skilled labor over several days. Prefabricated shower bases and wall panels cost much less.
  • What is behind the walls. Old bathrooms often hide water damage, outdated wiring or poor ventilation. This is where budgets break.
  • Fixtures and finishes. Vanities, faucets and glass doors range from modest to very expensive for the same function.
  • Labor in your area. It is typically the largest share of the bill.

Set the budget in three parts

  1. Must fix: leaks, ventilation, wiring, anything unsafe.
  2. Want: layout, storage, finishes.
  3. Contingency: keep 10% to 20% aside for hidden problems. If you do not need it, upgrade at the end.

Getting quotes you can compare

Write a one-page scope before calling anyone: what stays, what moves, which fixtures you want. Give the same page to each contractor. The FTC recommends getting several written estimates and asking why prices differ widely.

A good estimate separates demolition, plumbing, electrical, tile, fixtures and permits. A single lump sum is hard to compare and easy to inflate later.

Hiring checks

  • Confirm the license with your state or county and ask for proof of insurance.
  • Ask who pulls the permit. The FTC lists a contractor asking you to pull it yourself as a warning sign.
  • Get a written contract with start and finish dates, materials and a payment schedule.
  • Do not pay in full up front. Hold the final payment until the work is complete.

Homes built before 1978

Older homes may contain lead-based paint, and sanding or cutting can create hazardous dust. The EPA recommends hiring a lead-safe certified contractor for renovation work in these homes.

Savings that pay back

Fixtures with the EPA’s WaterSense label use less water without losing performance. A labeled bathroom faucet flows at 1.5 gallons a minute or less, at least 30% below the standard 2.2. Add a properly sized, vented exhaust fan as well. It protects everything else you just paid for.

Ways to cut cost without regret

  • Keep the layout.
  • Refinish or keep a sound tub instead of replacing it.
  • Spend on waterproofing and ventilation, save on decorative finishes.
  • Order all fixtures before work starts so the crew is not waiting.

The takeaway

Decide the scope first, keep plumbing where it is if you can, hold back a contingency and compare itemized quotes from licensed, insured contractors.

Sources

  1. How To Avoid a Home Improvement Scam · Federal Trade Commission
  2. Bathroom Faucets · U.S. Environmental Protection Agency, WaterSense
  3. Renovation, Repair and Painting Program: Consumers · U.S. Environmental Protection Agency

This guide is general information, not financial, legal or insurance advice. Rules, prices and availability vary by state and change over time. Check details with the provider or an official source before you decide.

Compare now