Home standby generators: a complete guide to sizing, fuel, installation and safety
Power cuts are more than an inconvenience when they last for days. Food spoils, sump pumps stop, homes get dangerously cold or hot, and medical equipment can fail. A home standby generator is a permanently installed unit that starts automatically within seconds of an outage and keeps power flowing until the grid comes back.
Standby generators are a large purchase, and the right choice depends on what you need to run, the fuel available to you and your budget. This guide explains how they work, how to size one, what installation involves and how to run any generator safely.
Standby vs portable generators
Standby generators
- Permanently installed outside the home on a pad, like an air conditioning unit.
- Run on natural gas or propane, so there is no refueling with gasoline.
- Connect to your electrical system through an automatic transfer switch, which detects an outage, starts the generator and switches your home to generator power without you doing anything.
- Can power the whole house, including central air conditioning, or a set of essential circuits.
- Cost much more to buy and install, but are the most convenient and safest option for frequent or long outages.
Portable generators
- Much cheaper and can be moved or used elsewhere.
- Usually run on gasoline, and some on propane or both (dual fuel).
- Must be started manually, placed outdoors away from the house and refueled.
- Power is delivered through extension cords or, more safely, through a manual transfer switch or interlock installed by an electrician.
Portable power stations
Battery-based units are quiet and safe to use indoors, but they store a limited amount of energy. They suit phones, lights and small appliances for short outages, not whole homes.
Rule of thumb: if outages are rare and short, a portable generator or power station may be enough. If outages are frequent, long, or someone in the home depends on power for health reasons, a standby generator is worth considering.
Step 1: decide what you need to run
Generators are rated in watts or kilowatts (kW). Before talking to installers, list what you want to keep running:
- Essentials: refrigerator and freezer, furnace fan or boiler, sump pump, well pump, lights, phone and internet, medical equipment.
- Comfort: central air conditioning, electric water heater, cooking appliances, laundry.
Two kinds of load matter:
- Running watts, the power an appliance needs while operating.
- Starting (surge) watts, the extra burst motors need to start. Air conditioners, well pumps and refrigerators can need several times their running watts for a moment.
Step 2: choose between whole-house and essential-circuit setups
- Whole-house systems power everything, sometimes with a load management device that briefly sheds large appliances such as air conditioning when demand peaks. These need a larger generator.
- Essential-circuit systems connect only selected circuits to the generator. A smaller generator can cover them, which lowers cost.
A qualified installer should do a load calculation based on your electrical panel, appliances and priorities. Be cautious of anyone who sizes a generator by house square footage alone.
Step 3: pick a fuel
- Natural gas. If you have a gas line, it provides an unlimited supply with no refueling. The installer may need to confirm your meter and line can supply enough gas.
- Propane. Stored in a tank on your property, which needs refilling. Good where natural gas is not available. Size the tank for the length of outage you want to cover, and keep it topped up before storm season.
- Diesel. Common in commercial settings and some larger residential units. Stored on site and needs fuel maintenance.
Generators produce slightly less power on natural gas than on propane, so check the rating for your fuel.
What installation involves
A standby generator is a significant electrical and fuel project. Expect:
- Site assessment for placement, clearances from windows, doors and vents, and local code requirements.
- Permits for electrical, gas and sometimes zoning. Your installer should pull them.
- A concrete or composite pad.
- Gas line or propane connection by a licensed professional.
- Transfer switch installation and wiring by a licensed electrician.
- Inspection by the local authority.
- Startup and testing, and an explanation of how the system works.
Get at least three written quotes, ideally from dealers authorized by the generator manufacturer, and check licenses and insurance. Compare the generator model and size, the transfer switch type, what fuel work is included, permit and inspection costs, and the warranty for both equipment and labor.
Running costs
Beyond the purchase price, budget for:
- Fuel during outages and during the automatic weekly or monthly self-test, which runs the generator briefly to keep it ready.
- Annual maintenance, including oil and filter changes, spark plugs and battery checks. Many dealers sell maintenance plans.
- Battery replacement every few years.
- Propane tank lease or refills, if applicable.
Maintenance checklist
- Keep the area around the unit clear of snow, leaves and plants.
- Check that the unit’s self-test runs as scheduled.
- Service it at least once a year, and after long periods of heavy use.
- Keep propane tanks filled well before storm season.
- Register the warranty and keep service records, as warranties often require regular maintenance.
Safety rules that matter most
Generators save lives in long outages, but misuse kills people every year, mostly through carbon monoxide poisoning. Carbon monoxide is colorless and odorless.
- Never run a portable generator indoors, in a garage, basement or crawlspace, even with doors or windows open.
- Place portable generators well away from the house, with the exhaust pointed away from doors, windows and vents.
- Install battery-operated or battery-backup carbon monoxide alarms on every level of your home and near sleeping areas.
- Never plug a generator into a wall outlet (“backfeeding”). It can electrocute utility workers and neighbors. Use a transfer switch or interlock installed by an electrician.
- Turn off and let a portable generator cool before refueling.
- Keep generators dry and protected from rain.
If anyone feels dizzy, sick or weak while a generator is running, get to fresh air immediately and call emergency services.
Is a standby generator worth it?
A standby generator is most likely to pay off if:
- Your area has frequent or long outages.
- You rely on a sump pump or well pump.
- Someone in your home needs powered medical equipment.
- You work from home and cannot afford downtime.
- You want to protect against frozen pipes or extreme heat.
Some buyers also value the convenience at resale, and some insurers offer small discounts. Ask your insurer.
Frequently asked questions
How long can a standby generator run? On natural gas, as long as the gas supply continues and the unit is maintained. On propane, as long as your tank lasts. Check the manufacturer’s guidance for extended run times and oil changes.
How loud are they? Quieter than most portable generators, but noticeable. Check local noise rules and the unit’s sound rating if neighbors are close.
Can I install one myself? Standby generators require licensed electrical and gas work, permits and inspections. Self-installation is not recommended and may void the warranty.
Will a generator work with solar panels? It can, but the system needs to be designed correctly. Ask your installer how the generator, solar inverter and any batteries will work together.
The takeaway
Start by listing what you need to run during an outage, then get a proper load calculation and at least three quotes from licensed, manufacturer-authorized installers. Choose natural gas or propane based on what is available, budget for annual maintenance, and follow the safety rules: carbon monoxide alarms on every level, no generators indoors, and never backfeed through a wall outlet.